The harvester has its own feed box, so that the feed can be smoothly poured into the feed truck. At the same time, a secondary innovation was made on the basis of the original straw collector, and a secondary crushing device was added to automatically crush the straw again, making the straw crush more in place. You can also control the hydraulic cylinder to adjust the header up and down to an appropriate position according to the required stubble height and ground equality. There is also a height device for the cutting table, which can accurately determine the height of the cutting stubble.

Harvester features:
1. Equipped with a special grain crushing device, the crushing effect is good.
2. The power input of the feeding roller and the header adopts a gear box and a transmission shaft, which has small power loss, is stable and reliable, and is not easy to be damaged.
3. With many years of manufacturing experience, the technology is mature and reliable.

Technical parameters of harvester:
Kernel loss rate: ≤2%
Particle crushing rate: ≤1%
Supporting power: 18-28 horsepower
Qualified rate of chopped length: ≥90%
Number of rows harvested: 2 rows, 3 rows, etc.
Stalk crushing and returning to the field form: rotary cutting
Operating range: 50-80 cm line spacing
Ear box volume: 0.96 cubic meters
Operating efficiency: 3-5 acres/hour
Dimensions: 4500*1300*2650mm (length * width * height)
Ear loss rate: ≤3%
Overall weight of harvester: 600KG
Ear height requirements: ≥80cm
Stripping rate: 70-85%

I