1, Performance features:
1. The machine is suitable for labeling cans. After the can is rolled into the machine, it is driven to roll by the belt pressed on the can. When the can passes through the heat
At the glue melting station, the cans are coated with hot-melt glue. As the cans move forward, the glue on the cans is pressed to the front of the label,
The label was glued up and began to roll on the can. At the same time, the gluing mechanism at the end of the label also applies glue to the end of the label.
As the can moved on, the label was rolled onto the can. Then the belt is rolled and driven out of the machine.
2. The machine has an alternate supply mechanism, so it does not need to stop when adding the standard.
3. The glue supply at the end is controlled by the can, with glue supplied by can, but not without can.
4. The machine adopts frequency conversion speed regulation, which can be adjusted at any time according to the production needs.
5. The machine is simple to replace the tank type, less replacement parts, only glue at both ends of the label, the amount of glue used is small, and the cost of labeling is low.
2, Suitable range:
1. This machine is a tin can labeling machine, which is suitable for tin can labeling;
2. It can quickly change the size of tinplate can, and the operation is simple, neat, beautiful and clean.
3, Technical parameters:
Labeling capacity: 200-500 cans / min (varies with can size)
Suitable can size: diameter: Φ 40-120mm, height: 250mm
Label size: width: 23-254mm; length: 117-380mm
Label adhesive: hot melt adhesive + quick drying adhesive
Power supply: three phase; 380V (or customized as required)
Electric power: 3kw
Compressed air: 2-4kg / m2; 10 L / min
Overall dimension: length 1856mm × width 750mm × height 1250mm
Weight: 750KG

A. Scraper-type spray elevator

Select stainless steel bracket, food-grade and hard plastic or stainless steel scraper, smoothing blade architecture to prevent the fruit jam; Using imported anti-corrosion bearings, double-sided seal; with continuously variable transmission motor, variable frequency Speed and low operating costsTitle goes here.

B. Sorting machine

Stainless steel roller conveyor, rotation and solution, a full range of check, no need ends. Manmade fruit platform, painted carbon steel bracket,stainless steel antiskid pedal,stainless steel fence.

C. Crusher

Fusing Italian technology, multiple sets of cross-blade structure, crusher size can be adjusted according to customer or specific project requirements, it will increase the juice juice rate of 2-3% relative to the traditional structure , which is suitable for production of onion sauce, carrot sauce, pepper sauce , apple sauce and other fruits and vegetables sauce and products

D. Double-stage pulping machine

It have tapered mesh structure and the gap with load can be adjusted, frequency control, so that the juice will be cleaner; Internal mesh aperture are based on customer or specific project requirements to order

E. Evaporator

Single-effect, double-effect,triple-effect and multi-effect evaporator, which will save more energy; Under vacuum, continuous low temperature cycle heating to maximize the protection of nutrients in the material as well as the originals. There are steam recovery system and double times condensate system, it can reduce the consumption of steam;

F. Sterilization machine

Having obtained nine ed technology, take full advantages of the material’s own heat exchange to save energy– about 40%

F. Filling machine

Adopt Italian technology, sub-head and double-headed, continuous filling, reduce return; Using steam injection to sterilize, to ensure filling in aseptic state , the shelf life of product will twp years at room temperature ; In the filling process,using turntable lifting mode to avoid secondary pollution.

Shanghai Jump automatic equipment Co., Ltd. Is modern high-tech joint-stock enterprises, formerly known as Shanghai Qianwei machinery plant, professional engaged in whole plant equipment design, manufacturing, R & D and turnkey project for juice and jam, tropical fruit processing, heat canned fruit juice drinks, tea drinks, yogurt, cheese and liquid milk dairy processing . The employee quality of the company is excellent, the backbone of the engineer and the core technology R & D personnel directly from the original Qianwei machinery factory, also has a number of food engineering and packaging machinery professional master and doctoral, fully equipped with the whole line project design and development, production and manufacture, installation and commissioning, technical training and after-sales service, etc. the comprehensive ability.

Our main production line

1 Tomato paste / puree / jam / concentrate, ketchup, chilli sauce , other fruit & vegetables sauce / jam processing line
2 Fruit & vegetables ( orange , guava, cirtrus, grape, pinapple, cherry, mango, apricot.etc. ) juice and pulp processing line
3 Pure, mineral water, Mixed beverage, drink (soda, Cola, Sprite, carbonated beverage, no gas fruit drink, herbal blend drink, beer,cider, fruit wine .etc. ) production line
4 Canned fruit & vegetables ( tomato, cherry, beans, mushuroom, yellow peach, olives, cucumber, pineapple, mango, chili, pickles and so on. ) production line
5 Dried fruit & vegetables ( dried mango, apricot, pineapple, raisin, blueberry .etc. ) production line 
6 Dairy (UHT milk, pasteurized milk, cheese, butter, yogurt, milk powder, margarine, ice cream)production line 
7 Fruit and vegetable powder (Tomato, pumpkin, cassava powder, strawberry powder, blueberry powder, bean powder, etc. ) production line 
8 Leisure snack (Dried freeze-dried fruit, puffed food, french fried potato chips, etc. ) production line

Pre-sales service

We can suggest customer the most suitable machine according to their formula and Raw material. “Design and development”, “manufacturing”, “installation and commissioning”, “technical training” and “after sales service”. We can introduce you supplier of raw material, bottles, labels etc. Welcome you to our production workshop to learn how our engineer produce. We could customize machines according to your real need, and we could send our engineer to your factory to install machines and train your worker of Operation and maintenance. Any more requests. Just let us know.